Bale Net Wrap Size Finder by Baler Model — Free US Shipping

A John Deere 535 uses 64-inch (162 cm) net wrap. Order SKU E64X7000G (64" × 7,000 ft, $239.99). The 535 has a fixed-chamber 5-foot baler that does not accept 67" wrap; that wider size is for the 568/569 and similar models.

A John Deere 460M accepts either 48" or 51" net wrap. SKU E48X9840G ($239.99) is the standard fit; SKU E51X9840G ($249.99) is also compatible. Pick based on local availability or desired bale-edge overhang.

A New Holland Roll-Belt 560 accepts either 64" or 67" net wrap. SKU E64X7000G ($239.99) is the standard chamber width; SKU E67X7000G ($249.99) gives a slight edge overhang.

A Vermeer 605M accepts either 64" or 67" net wrap. Order SKU E64X7000G ($239.99) for the standard fit or SKU E67X7000G ($249.99) for slight edge overhang.

A Case IH RB565 accepts either 64" or 67" net wrap. SKU E64X7000G is the recommended chamber width; SKU E67X7000G is also compatible.

XES Netting sells four widths: 48" (123 cm) × 9,840 ft, 51" (130 cm) × 9,840 ft, 64" (162 cm) × 7,000 ft, and 67" (170 cm) × 7,000 ft. All four come with free US shipping.

Use the picker above — select your brand and model and we will tell you. The chamber width of the baler (not the bale diameter) determines the net wrap size: 4-foot-chamber balers use 48"/51"; 5-foot-chamber balers use 64"/67". Always confirm with your operator manual.

When a baler accepts either size (for example most Roll-Belt 5-ft and Vermeer 5-series), you can pick either based on local availability or preference. The wider option (51" or 67") gives a slight edge overhang, which some operators prefer for moisture protection on outdoor-stored bales.

The Duckbill Baffle Kit is an OEM accessory for several New Holland BR/Roll-Belt and Case IH RBX/RB 4-foot balers. It modifies the chamber inlet so that 51" net wrap can be used in place of the native 48". If your baler is listed as "depends_on_kit" in our chart, you must have the kit installed to run 51" — check with your dealer.

Every model in our picker is verified against the manufacturer's own published spec — official OEM brochures from John Deere, New Holland, Case IH, Kubota, Massey Ferguson, Krone, Kuhn, and Vermeer, cross-checked against the UPU Industries / Farmer's netwrap-size-by-baler chart. The recommended size is the chamber width the OEM ships the baler with. If your baler model is not listed, use the contact form below — we'll research it and add it.

Yes — XES ships free anywhere in the lower 48 contiguous United States. Hawaii, Alaska, Canada, and Mexico are not currently served.

XES guidance: 3 wraps for silage (high moisture, short-term), 4 wraps for hay (standard outdoor storage), 5 wraps for straw (low cohesion). Add 1 extra wrap if storing outdoors more than 12 months or under harsh UV/freeze-thaw conditions.

XES Extreme net wrap is rated 680 lb breaking strength, DLG-certified (German Agricultural Society Report #7439), and provides 12 months of UV protection.

XES is a high-quality standard net wrap designed for any chamber that accepts net wrap. It is not John Deere CoverEdge — that is a JD-branded edge-to-edge product. For balers that can use either CoverEdge or standard net wrap (most JD 7/8/9/0-series), XES delivers the same field performance at 30-50% lower cost.

Yes — pallet quantities (16 or 20 rolls) are available with free freight shipping to anywhere in the lower 48. See the pallet product page or contact us for co-op pricing.