Net Wrap Guide

A New Holland 688 round baler in the field — sibling to the BR740, BR7090 and Roll-Belt models that share the same duck-bill spreader, brake tension and knife geometry behind most net wrap failures.

New Holland Round Baler Net Wrap Problems: 8 Co...

Eight specific causes of net wrap failure on New Holland BR740, BR7090, Roll-Belt 450/460/560 and 7070/7090 balers — duck-bill feed jams, brake tension drift, won't-cut and won't-stop faults, and the...

A round baler at work in a hayfield — the moment when wrap tearing or shredding shows up and a 10-minute swap-and-test isolates whether it's the wrap or the baler.

Bad Net Wrap or Baler Issue? A 10-Minute Diagno...

The 10-minute swap-and-test diagnostic that tells you whether wrap tearing or shredding is a wrap-quality issue or a baler problem — plus the three on-the-roll signs of bad wrap, the...

A John Deere 568 round baler operating in a hay field — the model where rusted net wrap support pans, Bale-Trak Plus monitor faults, and stuck wrap actuators most commonly appear.

John Deere Round Baler Net Wrap Problems: 8 Com...

Eight specific causes of net wrap failure on John Deere 458, 467, 535, 567, 568, 569, 450M, 460M and 469 round balers — from the rusted-out 568 support pan and...

New Holland 688 round baler with Auto-Wrap dispenser — most net-wrap cutting failures on round balers trace to a dull or sticky knife arm, weak brake band, or misaligned wrap-feed mechanism

Net Wrap Won't Cut on Your Baler? 7 Causes & Fixes

A diagnostic flow for baler operators whose machine has stopped cutting net wrap. 7 ordered causes from cheapest to most expensive, with check-and-fix steps.

A John Deere 568 round baler in working condition — the model where the net wrap support pan typically rusts out after 30,000-50,000 bales.

Why Your John Deere 568 Net Wrap Pan Rusts Out ...

Why the John Deere 568 / 567 / 569 net wrap support pan rusts out, how to diagnose which part actually failed, and the $200-$300 local-shop rebuild that operators report...

Round hay bales in a field holding their shape after baling - proper net wrapping prevents shape loss

Round Bales Not Holding Shape? 7 Causes and How...

When round bales sag, deform, or unravel, the cause is almost always one of seven things. Here is the diagnostic walkthrough we use on farm visits.