Net Wrap Guide

A tractor and round baler baling in a field, the net wrap system working at the tailgate where duckbill and actuator no-start faults occur

Net Wrap Won't Start or Feed? Duckbill, Baffle ...

By the XES Netting team — bale net-wrap manufacturer · Updated July 29, 2026 · ~8 min read Quick answer: When net wrap won't start and the bale just spins,...

Round hay bales scattered across a stubble field at golden hour with a rural church in the background

Why Net Wrap Breaks (Bursts) on Finished Bales ...

By the XES Netting team — bale net-wrap manufacturer · Updated July 19, 2026 · ~8 min read Quick answer: Finished bales burst for a short list of repeatable reasons...

A John Deere 568 MegaWide Plus Cover Edge net-wrap round baler hitched to a tractor

Round Baler Monitor Troubleshooting: Why Bale C...

By the XES Netting team — bale net-wrap manufacturer · Updated August 16, 2026 · ~14 min read Quick answer: Treat a round baler monitor problem as an identification job...

New Holland 688 round baler with Auto-Wrap dispenser — when a baler will not stop wrapping, the cause is usually the wrap-count sensor, a setting, a stuck relay, low voltage, or an uncut knife.

Round Baler Won't Stop Wrapping? 6 Causes for N...

By the XES Netting team — bale net-wrap manufacturer · Updated June 10, 2026 · ~7 min read A round baler that won't cut the wrap is one problem. A...

A John Deere 568 round baler working in the field -- the rubber net-wrap feed roller on machines like this is where net clings from static and a dusting of baby powder restores clean feed.

Does Baby Powder Help Net Wrap? Talc & Graphite...

By the XES Netting team — bale net-wrap manufacturer · Updated June 6, 2026 · ~7 min read Quick answer: Yes — dusting the rubber feed roller (and the net...

Round bales wrapped in white net wrap with the hexagonal mesh clearly visible -- even, edge-to-edge coverage is what fails when net catches only one side.

Net Wrap Only on One Side? Causes & Fixes

By the XES Netting team — bale net-wrap manufacturer · Updated June 3, 2026 · ~8 min read Quick answer: If your net wrap is only covering one side of...