New Holland 4-foot round baler producing a 48-inch wrapped bale

What Size Net Wrap Fits a New Holland Roll-Belt 460? (48″ or 51″ Guide)

Short answer: A New Holland Roll-Belt 460 uses 48″ or 51″ net wrap. The standard XES SKU is E48X9840G (48″ x 9,840 ft, $239.99), with SKU E51X9840G as the wider/alternate option. Free US shipping on every order.

Heads-up: This baler requires the Duckbill Baffle Kit to run standard net wrap reliably. Confirm your machine has the kit installed before ordering.

New Holland Roll-Belt 460 net wrap quick specs

Spec Value
Chamber type 4-ft Roll-Belt (2013-present)
Recommended net wrap width 48″ or 51″ (122 cm / 130 cm)
XES SKU (primary) E48X9840G
XES SKU (alternate) E51X9840G
Roll length 9,840 ft
Roll price (single) $239.99 / $249.99
Breaking strength 680 lb
UV protection 12 months outdoor
Certification DLG Report #7439, ISO 9001:2008
Shipping Free to lower 48 US states

Shop 48″ net wrap (SKU E48X9840G) → or get the 51″ (SKU E51X9840G) →

What size net wrap fits a New Holland BR740 baler — New Holland 688 hay baler in the field, representative of the New Holland round baler line

Why 48″ or 51″ is the right size for the Roll-Belt 460

The Roll-Belt 460 is the modern successor to the BR740/BR750 family in New Holland's 4-foot Roll-Belt line (2013-present), known for its belt-and-roll chamber and softer-core dry hay bales.

Net wrap width is determined by the chamber width of the baler, not the bale diameter. A 4-ft roll-belt baler like the New Holland Roll-Belt 460 has a chamber that accepts 48″ or 51″ wrap. Going narrower will leave bare patches at the bale edges (water ingress, hay loss); going wider than the chamber's tolerance jams the wrap roller or causes wrinkling.

On Roll-Belt balers from this era, New Holland's own documentation requires the Duckbill Baffle Kit (NH part) to handle standard 48-inch/51-inch net wrap reliably. Confirm your machine has the kit installed before ordering.

How many wraps per bale on a

XES guidance based on crop and storage:

  • Silage (high moisture, short-term): 3 wraps
  • Hay (dry, standard outdoor storage): 4 wraps
  • Straw (low cohesion): 5 wraps
  • Outdoor storage past 12 months or harsh UV/freeze-thaw: add 1 extra wrap

At the typical settings above, one roll yields approximately 615 bales per roll at 4 wraps per 4-ft bale; roughly 820 at 3 wraps (silage).

If you run more than one baler, here are the sizes for nearby models in the lineup:

Model Chamber Net Wrap Size SKU
New Holland Roll-Belt 450 (2013-present) 4-ft Roll-Belt 48″ or 51″ E48X9840G / E51X9840G
New Holland BR740 (2003-2013) 4-ft chamber 48″ or 51″ E48X9840G / E51X9840G
New Holland BR7090 (2008-2013) 4-ft chamber 48″ or 51″ E48X9840G / E51X9840G
New Holland Roll-Belt 560 (2013-present) 5-ft Roll-Belt 64″ or 67″ E64X7000G / E67X7000G

Don't see your model? Use our Bale Net Wrap Size Finder to look up your baler.

Not sure your model number is exactly right?

If you're not 100% sure of your baler model, or you want to confirm the size before ordering, use our free Bale Net Wrap Size Finder. Pick your brand, pick your model, get the exact SKU instantly.

Open the size finder →

Frequently asked questions

What size net wrap does a New Holland Roll-Belt 460 use?

A New Holland Roll-Belt 460 accepts either 48-inch (122 cm) or 51-inch (130 cm) net wrap. XES SKU E48X9840G ($239.99) is the standard fit; SKU E51X9840G ($249.99) is the wider option.

Should I pick 48-inch or 51-inch for my Roll-Belt 460?

If your hay is going under cover within a few weeks, 48-inch is the standard chamber width and gives a clean, square-edge bale. If you store bales outdoors for 6+ months, 51-inch overhangs slightly and provides extra edge protection against rain ingress.

Do I need any kit on my Roll-Belt 460 to run XES net wrap?

Yes — the Duckbill Baffle Kit is required from the factory on this baler to handle standard net wrap reliably. Confirm your machine has it before ordering.

How many bales will one roll of XES 48-inch net wrap make on a Roll-Belt 460?

One 9,840-ft roll yields approximately 615 bales per roll at 4 wraps per 4-ft bale; roughly 820 at 3 wraps (silage).

Is XES net wrap a CoverEdge alternative for the Roll-Belt 460?

XES is a high-quality standard net wrap that fits the Roll-Belt 460 chamber. CoverEdge is an OEM-branded edge-to-edge product. For balers that accept either, XES delivers similar field performance at 30-50% lower cost.

Why XES net wrap is the right pick

  • 680 lb breaking strength — handles dense bales without splitting.
  • DLG-certified (German Agricultural Society Report #7439) — independently tested.
  • Factory-direct pricing — 30-50% under dealer wrap.
  • 12-month UV protection — bales hold shape even outdoors.
  • Free US shipping — delivered to your farm at no extra cost.
  • Pallet pricing available — 16 or 20 rolls with free freight, ideal for co-ops and large operations.

Shop 48″ net wrap for the New Holland Roll-Belt 460 → or buy by the pallet →

More baler net wrap guides

Related buyer guides: Best Bale Net Wrap 2026, Net Wrap Sizes Guide, Cheapest Net Wrap. Other baler models: John Deere 460M, John Deere 535, John Deere 569, Vermeer 604M, Vermeer 605M.

Inline photo: New Holland 688 hay baler by Acroterion, licensed under CC BY-SA 4.0, via Wikimedia Commons.

Back to blog

Shop online with us

Reliable bale net wrap at direct manufacturer pricing. Free shipping on all retail product orders. Pallet order available at even lower prices.